Plywood CNC Design Needed
Budget: $10 – $30 USD
I have a CNC router set up for plywood and I want a fresh, production-ready design that I can drop straight into my CAM software. The job is strictly about design creation—I'll handle all tool-paths and machine operation myself.
Here’s what I need from you:
• A clean vector file (DXF, SVG or AI) correctly scaled for 18 mm plywood.
• Geometry that imports without open nodes or stray duplicate lines.
• Clear layer naming so I can distinguish between through-cuts, pockets and engraving.
• Dog-bone corners or other joinery details where tight internal corners are required.
If you prefer designing in Fusion 360, VCarve, Illustrator or similar, that’s fine as long as the exported file meets the criteria above.
I’ll review the file by loading it in my CAM software; if it imports error-free and the layers make sense, we’re good. Let me know how long the design will take and feel free to ask any sizing questions before you start.
Here’s what I need from you:
• A clean vector file (DXF, SVG or AI) correctly scaled for 18 mm plywood.
• Geometry that imports without open nodes or stray duplicate lines.
• Clear layer naming so I can distinguish between through-cuts, pockets and engraving.
• Dog-bone corners or other joinery details where tight internal corners are required.
If you prefer designing in Fusion 360, VCarve, Illustrator or similar, that’s fine as long as the exported file meets the criteria above.
I’ll review the file by loading it in my CAM software; if it imports error-free and the layers make sense, we’re good. Let me know how long the design will take and feel free to ask any sizing questions before you start.
Related categories:
AutoCAD
Product Design
3D Design
Adobe Illustrator
Mechanical Design
Vector Design