One Piece PC Case Mod Design
Budget: $30 – $250 USD
I am looking for a skilled 3D designer/modeler to create a unique PC Case Mod inspired by Monkey D. Luffy – Gear 5 Nika from the anime One Piece.
The case should represent the upper half of the character’s body while integrating all essential PC components inside:
Motherboard (ATX)
Length: 305 mm × Width: 244 mm
Graphics Card (GPU)
Length: 302 mm × Width: 130 mm × Thickness: 56 mm
Power Supply Unit (PSU)
Length: 160 mm × Width: 150 mm × Height: 86 mm
Radiator (AIO 360 with fans)
Length: 397 mm × Width: 120 mm × Thickness: 52 mm
CPU Block
Diameter: 80 mm × Height: 55 mm
---
Maximum Overall Case Dimensions:
Height: must not exceed 690 mm (69 cm).
Depth : up to 300 mm (30 cm).
Width : up to 450 mm (45 cm).
---
Cooling Layout:
360 Radiator mounted at the back (Exhaust).
Two shoulder fans (120–140 mm Intake).
One slim head fan (120 mm – Exhaust).
Air ducts/baffles to optimize airflow and prevent heat recirculation.
---
Straw Hat Integration:
Placed behind the head at neck level.
Designed as an additional compartment for either PSU or HDD/SSD storage.
Bottom panel must be detachable for easy maintenance.
Ventilation slots styled like straw textures + optional LED lighting.
---
Chest "X" Mark:
The iconic X mark on Luffy’s chest must be designed as a transparent window (acrylic/plexiglass).
Purpose: showcase internal components (motherboard, GPU, lighting).
Supported by an internal frame for secure mounting.
Optional RGB edge-lighting to enhance aesthetics.
---
Requirements:
Strong expertise in 3D modeling and product design.
High accuracy in measurements to ensure proper fit of internal components.
Ability to balance artistic aesthetics with functional engineering.
Prior experience in PC Case Modding or similar hardware projects (preferred).
Final design must be delivered in STL or OBJ format, ready for 3D printing.
The case must be modular (multi-part) for easy disassembly and reassembly.
An Assembly Guide / Exploded View must be included to illustrate how parts fit together.
Cable management clearance behind the motherboard tray must be at least 20 mm.
Please attach samples of previous similar work.
The case should represent the upper half of the character’s body while integrating all essential PC components inside:
Motherboard (ATX)
Length: 305 mm × Width: 244 mm
Graphics Card (GPU)
Length: 302 mm × Width: 130 mm × Thickness: 56 mm
Power Supply Unit (PSU)
Length: 160 mm × Width: 150 mm × Height: 86 mm
Radiator (AIO 360 with fans)
Length: 397 mm × Width: 120 mm × Thickness: 52 mm
CPU Block
Diameter: 80 mm × Height: 55 mm
---
Maximum Overall Case Dimensions:
Height: must not exceed 690 mm (69 cm).
Depth : up to 300 mm (30 cm).
Width : up to 450 mm (45 cm).
---
Cooling Layout:
360 Radiator mounted at the back (Exhaust).
Two shoulder fans (120–140 mm Intake).
One slim head fan (120 mm – Exhaust).
Air ducts/baffles to optimize airflow and prevent heat recirculation.
---
Straw Hat Integration:
Placed behind the head at neck level.
Designed as an additional compartment for either PSU or HDD/SSD storage.
Bottom panel must be detachable for easy maintenance.
Ventilation slots styled like straw textures + optional LED lighting.
---
Chest "X" Mark:
The iconic X mark on Luffy’s chest must be designed as a transparent window (acrylic/plexiglass).
Purpose: showcase internal components (motherboard, GPU, lighting).
Supported by an internal frame for secure mounting.
Optional RGB edge-lighting to enhance aesthetics.
---
Requirements:
Strong expertise in 3D modeling and product design.
High accuracy in measurements to ensure proper fit of internal components.
Ability to balance artistic aesthetics with functional engineering.
Prior experience in PC Case Modding or similar hardware projects (preferred).
Final design must be delivered in STL or OBJ format, ready for 3D printing.
The case must be modular (multi-part) for easy disassembly and reassembly.
An Assembly Guide / Exploded View must be included to illustrate how parts fit together.
Cable management clearance behind the motherboard tray must be at least 20 mm.
Please attach samples of previous similar work.
Related categories:
3D Rendering
Product Design
3D Modelling
3D Animation
3D Design
3D CAD
3D Drafting
3D Visualization