3D Model of Outdoor Dining Space
Budget: $30 – $250 USD
I am looking to build a 3D model for an outdoor dining area. Please be advised of the following:
1. The area is measured 22' (W) x 60' (L);
2. There will be a back wall built by a fence (it could be wood or wire);
3. The roof will be built with clear corrugated PVC roof panel;
4. The height of the front section is 12' and the height for the back section where the back wall is will be at 11'. The roof area is measured 23' x 61';
5. There will be no wall on the three sides;
6. Inside the dining area, there will be 10 sets of 60" x 60" metal outdoor tables with 8 chairs;
7. On one end of the dining area, there will be 5 units of open-air merchandise refrigerated case (36-1/8" W x 31-3/16" D x 57-3/8" H each) (https://www.globalindustrial.com/p/refrigerated-open-air-merchandiser-w-curtain-13-8-cu-ft-stainless-steel?msclkid=e1dcd743c35312e6685ebd7fd79e1c63&utm_source=bing&utm_medium=cpc&utm_campaign=%5BADL%5D%20%5BPLA%5D%20%5BtROAS%5D%20(Foodservice%20%26%20Retail%20-%20Prime)%20-%20%7BNew%7D&utm_term=4583039411662423&utm_content=(Foodservice%20%26%20Retail%20-%20Appliances)&adlclid=e1dcd743c35312e6685ebd7fd79e1c63) and a L-Shape workstation;
8. Please also design a receptionist area and a small bar area;
8. When designing this project, please pay attention to the traffic flow and how people will move around the area.
9. In the winter, when the weather gets cold, plastic films can be dropped from the roof frame to cover the area to keep warm.
10.Please add decorative designs and lighting to enhance the overall look of the space.
To support the structure, you will need to install poles around the area. The plastic films can be hung from the frame under the roof.
1. The area is measured 22' (W) x 60' (L);
2. There will be a back wall built by a fence (it could be wood or wire);
3. The roof will be built with clear corrugated PVC roof panel;
4. The height of the front section is 12' and the height for the back section where the back wall is will be at 11'. The roof area is measured 23' x 61';
5. There will be no wall on the three sides;
6. Inside the dining area, there will be 10 sets of 60" x 60" metal outdoor tables with 8 chairs;
7. On one end of the dining area, there will be 5 units of open-air merchandise refrigerated case (36-1/8" W x 31-3/16" D x 57-3/8" H each) (https://www.globalindustrial.com/p/refrigerated-open-air-merchandiser-w-curtain-13-8-cu-ft-stainless-steel?msclkid=e1dcd743c35312e6685ebd7fd79e1c63&utm_source=bing&utm_medium=cpc&utm_campaign=%5BADL%5D%20%5BPLA%5D%20%5BtROAS%5D%20(Foodservice%20%26%20Retail%20-%20Prime)%20-%20%7BNew%7D&utm_term=4583039411662423&utm_content=(Foodservice%20%26%20Retail%20-%20Appliances)&adlclid=e1dcd743c35312e6685ebd7fd79e1c63) and a L-Shape workstation;
8. Please also design a receptionist area and a small bar area;
8. When designing this project, please pay attention to the traffic flow and how people will move around the area.
9. In the winter, when the weather gets cold, plastic films can be dropped from the roof frame to cover the area to keep warm.
10.Please add decorative designs and lighting to enhance the overall look of the space.
To support the structure, you will need to install poles around the area. The plastic films can be hung from the frame under the roof.