Metal Housing for electronics
Budget: $250 – $750 USD
I am seeking a skilled professional to design a metal housing for an electronic device.
The electronics itself is a 160x160 mm main board with several boards plugged vertically into it. The front of the device shall integrate a touch screen:
https://www.waveshare.com/wiki/5inch_DSI_LCD#Drawing
The back of the device shall contain several openings for the different connectors:
On switch, power in, Ethernet and USB from the integrated Rapberry pi4, 3x BNC, 1xDB9, 2xSHV.
The device should stand on rubber feets, model not yet selected.
Step files of the electronics are available on request.
I would prefer if this design could be done with FreeCad, as I would like to be able to make changes myself.
The attached files are for an older device with a different screen, different size of boards, different connector positions, just to give an idea.
The electronics itself is a 160x160 mm main board with several boards plugged vertically into it. The front of the device shall integrate a touch screen:
https://www.waveshare.com/wiki/5inch_DSI_LCD#Drawing
The back of the device shall contain several openings for the different connectors:
On switch, power in, Ethernet and USB from the integrated Rapberry pi4, 3x BNC, 1xDB9, 2xSHV.
The device should stand on rubber feets, model not yet selected.
Step files of the electronics are available on request.
I would prefer if this design could be done with FreeCad, as I would like to be able to make changes myself.
The attached files are for an older device with a different screen, different size of boards, different connector positions, just to give an idea.