3D Enclosure Design and Technical Drawings for Custom UPS Unit
Budget: ₹600 – ₹1,500 INR
I need a skilled 3D designer/mechanical CAD expert to create a full 3D enclosure model + complete technical drawings for my custom UPS device. The enclosure design must match the external look of the attached reference model (exact same appearance) while accommodating the internal components listed below.
Internal components that must fit inside the enclosure:
• SMPS PCB with a size of 90 mm x 90 mm
• Lithium battery pack (3S3P) using 3.7V cells
• Proper mounting points for both the PCB and battery pack
• Ventilation spacing and cable routing paths
• Optionally, space for small connectors, switches, or LED indicators (details can be finalized during the project)
Deliverables Required:
1. Complete 3D enclosure model (preferred formats: STEP, STL, IGES, Fusion 360, SolidWorks).
2. Technical drawings with measurements for manufacturing.
3. Exploded view showing how internal components will be placed.
4. Final design must match the external look of the attachment.
Notes:
• Internal layout must be clean and optimized.
• Enclosure should be practical for injection molding or 3D printing (designer may recommend improvements).
• All tolerances must be suitable for production.
What I will provide you:
• The external reference image/model (see attachment).
• PCB size and battery pack configuration details.
• Additional measurements if needed.
Looking for:
• Someone experienced in enclosure design for electronics.
• Ability to deliver accurate and production-ready drawings.
• Quick communication and iterations if needed.
Internal components that must fit inside the enclosure:
• SMPS PCB with a size of 90 mm x 90 mm
• Lithium battery pack (3S3P) using 3.7V cells
• Proper mounting points for both the PCB and battery pack
• Ventilation spacing and cable routing paths
• Optionally, space for small connectors, switches, or LED indicators (details can be finalized during the project)
Deliverables Required:
1. Complete 3D enclosure model (preferred formats: STEP, STL, IGES, Fusion 360, SolidWorks).
2. Technical drawings with measurements for manufacturing.
3. Exploded view showing how internal components will be placed.
4. Final design must match the external look of the attachment.
Notes:
• Internal layout must be clean and optimized.
• Enclosure should be practical for injection molding or 3D printing (designer may recommend improvements).
• All tolerances must be suitable for production.
What I will provide you:
• The external reference image/model (see attachment).
• PCB size and battery pack configuration details.
• Additional measurements if needed.
Looking for:
• Someone experienced in enclosure design for electronics.
• Ability to deliver accurate and production-ready drawings.
• Quick communication and iterations if needed.