Custom PC Case Design
Budget: $250 – $750 AUD
I'm looking for someone to design me a Custom PC case capable of fitting a list of specific components.
I will need an expert in PC Case design and someone familiar with pc building.
The design will have to be full, and feature any components, fixtures, components etc.
I'm looking for the design to be primarily anodized aluminum, with a timber front similar to the fractal design North
https://www.fractal-design.com/products/cases/north/ while being as small as possible.
Case should be less than 500mm High, 500mm Long and 250mm Wide (if this is not possible exceptions can be made)
Design should be durable, have good airflow as well as filters and be cosmetically pleasing.
Designs should be provided in an AUTODESK inventor assembly and individual .ITP files.
Should be capable of fitting a standard ATX, Micro-ATX and Mini-ITX motherboard (ATX is optional depending on overall case size) with a watercooled CPU block and standard tubing.
A watercooled RTX 5090 with a block similar to this
https://shop.watercool.de/HEATKILLER-V-PRO-for-RTX-5090-ASUS-TUF-Ni-Bl-aRGB_1
2x 360mm Radiators with fans like this on the top and bottom as intakes, radiators can be slimmer variety or config if it allows for smaller size.
https://shop.watercool.de/HEATKILLER-RAD-360-L-Black_1
1x 120mm Radiator like this with fan at the back as intake
https://shop.watercool.de/HEATKILLER-RAD-120-L-Black_1
Fans at front as exhaust, either 120mm or 140mm.
A distro/pump like this
https://shop.watercool.de/UNI-120-Reservoir-Acryl
Anything else important to design of case like PSU cutout, cable management, watercooling tubes, mobo cutouts, pcie cutouts etc.
I will need an expert in PC Case design and someone familiar with pc building.
The design will have to be full, and feature any components, fixtures, components etc.
I'm looking for the design to be primarily anodized aluminum, with a timber front similar to the fractal design North
https://www.fractal-design.com/products/cases/north/ while being as small as possible.
Case should be less than 500mm High, 500mm Long and 250mm Wide (if this is not possible exceptions can be made)
Design should be durable, have good airflow as well as filters and be cosmetically pleasing.
Designs should be provided in an AUTODESK inventor assembly and individual .ITP files.
Should be capable of fitting a standard ATX, Micro-ATX and Mini-ITX motherboard (ATX is optional depending on overall case size) with a watercooled CPU block and standard tubing.
A watercooled RTX 5090 with a block similar to this
https://shop.watercool.de/HEATKILLER-V-PRO-for-RTX-5090-ASUS-TUF-Ni-Bl-aRGB_1
2x 360mm Radiators with fans like this on the top and bottom as intakes, radiators can be slimmer variety or config if it allows for smaller size.
https://shop.watercool.de/HEATKILLER-RAD-360-L-Black_1
1x 120mm Radiator like this with fan at the back as intake
https://shop.watercool.de/HEATKILLER-RAD-120-L-Black_1
Fans at front as exhaust, either 120mm or 140mm.
A distro/pump like this
https://shop.watercool.de/UNI-120-Reservoir-Acryl
Anything else important to design of case like PSU cutout, cable management, watercooling tubes, mobo cutouts, pcie cutouts etc.