Nest Steel Tube IGES Files using Tubes-T
Budget: $30 – $250 USD
I already have a set of tube models saved as IGES. What I need is a clean, production-ready nest that fits every part into a single 6 m stock length ready for laser cutting.
The tubes will be cut from steel, anywhere between 2 mm and 8 mm wall thickness, and I want them arranged horizontally in the nest. Please preserve all part numbers and any hole geometry exactly as supplied.
Deliverable: one optimised file (IGES, STEP or DXF—whichever retains accuracy best) showing the full 6 m layout, plus a simple cut list indicating start-end positions and remaining scrap, if any. The result should be ready to hand straight to the laser operator with no further tweaking.
The tubes will be cut from steel, anywhere between 2 mm and 8 mm wall thickness, and I want them arranged horizontally in the nest. Please preserve all part numbers and any hole geometry exactly as supplied.
Deliverable: one optimised file (IGES, STEP or DXF—whichever retains accuracy best) showing the full 6 m layout, plus a simple cut list indicating start-end positions and remaining scrap, if any. The result should be ready to hand straight to the laser operator with no further tweaking.