Custom 3D CAD Modeling For "Vulture" Putter

Project: CAD Modeling for Custom 3D-Printable Mallet Putter ("The Vulture")
​Overview:
Need a clean, parametric 3D CAD model (SolidWorks or Fusion 360) and a .step export for a custom mallet putter head based on provided visual references.
​Core Specs to Model:
​Head Geometry: Open-frame mallet with solid-slab aero-wings (sharp angular texturing, no lattices) and a traditional flow-neck hosel positioned on the heel.
​Alignment & Paint-Fill: Center front-to-back alignment channel modeled as a recessed V-shaped groove designed to hold a clean paint-fill.
​Branding & Text Integration: Leave shallow engraved/recessed pockets (0.5mm depth) for text placement: "VULTURE" styled boldly across the rear bumper/edge, and "BIRDIE DOWN" lettering cleanly positioned on the bottom sole plate.
​Weight Pockets: Two 0.5-inch (12.7mm) diameter by 30.0mm deep blind holes inside the rear wings, accessed from the sole plate.
​Hardware Integration: Model the mouth of the weight pockets to accept standard brass heat-set inserts and flush hex socket screws.
​Target: Designed to achieve a 350g–360g raw head weight.
​Deliverables:
​Parametric source files (.sldprt / .f3d)
​STEP (.step) file