Outbuilding Construction
Budget: £10 – £20 GBP
Scaled Layouts (Draughtsman‑Ready)
Project: Detached Outbuilding / Games Room
Address: 11 Cliff Lane, Lincoln
Authority: North Kesteven District Council
---
Overview
Layouts prepared at recognised planning scales for LDC and Building Control. Fully dimensioned and suitable for direct CAD tracing.
---
D01 – Floor Plan (1:50)
Overall size: 6000 × 3500 mm
Wall build‑up: 102.5 mm brick / 100 mm insulated cavity / 100 mm fibolite block (≈302.5 mm total)
Openings:
Front (6.0 m): 3000 mm double UPVC doors, centred
Side (3.5 m): 900 mm single door, centred
Approx. internal clear size: 5395 × 2895 mm
---
D02 – Elevations (1:50)
Facing brick: Forterra Hampton Rural Blend
UPVC frames: light grey
Heights:
Max overall height: 2500 mm
Rear (low point): approx. 2350 mm
Roof: flat lean‑to falling to rear
(Note: Max height 2.5 m – Permitted Development compliant)
---
D03 – Roof Plan (1:50)
Roof size: 6000 × 3500 mm
Flat lean‑to roof, fall to rear
Minimum finished fall: 1:40
Rear gutter and downpipe
---
D04 – Section A‑A (1:20)
Foundations:
600 mm wide strip footing, 450 mm deep (min), GEN3 concrete
Floor:
150 mm Type 1 hardcore
Sand blinding
1200 gauge DPM
A142 mesh
100 mm GEN3 concrete slab
Roof:
C24 timber joists with firrings
OSB3 deck and felt covering
---
D05 – Lintels
Double doors: 3000 mm opening, 3300 mm lintel
Single door: 900 mm opening, 1200 mm lintel
---
CAD Notes
Plans / elevations / roof: 1:50
Sections: 1:20
All dimensions in mm
North arrow on site plan
Title: Proposed Detached Outbuilding
Client: Adam Burdass
---
This information is sufficient for rapid CAD production and council submission.
Project: Detached Outbuilding / Games Room
Address: 11 Cliff Lane, Lincoln
Authority: North Kesteven District Council
---
Overview
Layouts prepared at recognised planning scales for LDC and Building Control. Fully dimensioned and suitable for direct CAD tracing.
---
D01 – Floor Plan (1:50)
Overall size: 6000 × 3500 mm
Wall build‑up: 102.5 mm brick / 100 mm insulated cavity / 100 mm fibolite block (≈302.5 mm total)
Openings:
Front (6.0 m): 3000 mm double UPVC doors, centred
Side (3.5 m): 900 mm single door, centred
Approx. internal clear size: 5395 × 2895 mm
---
D02 – Elevations (1:50)
Facing brick: Forterra Hampton Rural Blend
UPVC frames: light grey
Heights:
Max overall height: 2500 mm
Rear (low point): approx. 2350 mm
Roof: flat lean‑to falling to rear
(Note: Max height 2.5 m – Permitted Development compliant)
---
D03 – Roof Plan (1:50)
Roof size: 6000 × 3500 mm
Flat lean‑to roof, fall to rear
Minimum finished fall: 1:40
Rear gutter and downpipe
---
D04 – Section A‑A (1:20)
Foundations:
600 mm wide strip footing, 450 mm deep (min), GEN3 concrete
Floor:
150 mm Type 1 hardcore
Sand blinding
1200 gauge DPM
A142 mesh
100 mm GEN3 concrete slab
Roof:
C24 timber joists with firrings
OSB3 deck and felt covering
---
D05 – Lintels
Double doors: 3000 mm opening, 3300 mm lintel
Single door: 900 mm opening, 1200 mm lintel
---
CAD Notes
Plans / elevations / roof: 1:50
Sections: 1:20
All dimensions in mm
North arrow on site plan
Title: Proposed Detached Outbuilding
Client: Adam Burdass
---
This information is sufficient for rapid CAD production and council submission.
Related categories:
CAD/CAM
Building Architecture
3D Rendering
AutoCAD
Building Design
Building Engineering
2D Drafting
Construction