CNC Ready Modern Study Table Design

I have sketched out a modern study table concept that combines a clean silhouette with practical storage, but I now need a professional drawing set that can go straight to a CNC shop. The layout includes both drawers and open shelves, and I can share my rough dimensions as a starting point—expect a bit of back-and-forth to fine-tune proportions and panel thicknesses for optimal stability and material yield.

Here’s what I expect to receive from you:

• An editable DWG (or equivalent) with fully dimensioned 2D plans, elevations, and section views.
• Layer-separated DXF files arranged for CNC cutting, clearly labelled so the fabricator can load them without manual tweaking.
• A concise cut-list and hardware call-outs that match what appears in the drawings.
• A quick 3D visual (any lightweight format is fine) so I can confirm aesthetics before sign-off.

Please keep best practices for cabinet construction in mind—accurate tolerances, proper joinery for plywood or MDF, and allowance for drawer slides. If you already have favourite plug-ins or nesting software, great; just make sure the final DXFs open cleanly in standard CAM tools.

Once I approve the drawings, the project is complete. I’m happy to answer questions promptly so we can wrap this up efficiently.

my main requirements
- no nail joints (use like butt joint, dovetail joint, etc)(if absolutely necessary can use minimal nails)
- 18mm plywood
- provide me all the files, so I can use them to directly load into cnc machine cut a 18mm sheet.
- ready to provide necessary support,if required, after completing the project and if I had any trouble getting the CNC cut

Dimensions : 3 feet width, 6feet height, 2 feet depth